220 Ton All Terrain Truck Crane Construction Equipment XCA220
Brief Introduction
Developed for both domestic and international markets, XCA 220 all-terrain crane has an extensive applicability, and is widely suitable for lifting and installation operations in oil field construction, wharf building, bridge erection, etc.
With a 7-section elliptical boom extendable in the 13.4-73m range, an infinite luffing trussed jib extendable to 44 meters (incl. an 8-m-long additional section) and supported by 10x8x10 H-shaped triggers, the 5-axle chassis-mounted crane has an effective reach of as large as 108.2 meters. In addition, the twin independent winch layout, the modular balance weights and the new-type energy-efficient hydraulic system also make it stand out from its industry peers.
Its main performance characteristics are listed as follows:
1. A larger lifting height of up to 108 meters and a larger lifting capacity;
2. A single engine system of higher power and a maximum gradeability of 67%;
3. The design for efficient site transfer makes easy shifting with mounted balance weights to nearby workplaces.
4. The new-type energy-efficient hydraulic system contributes to a lower fuel consumption rate, a higher micro-motion performance and a better maneuverability;
5. The innovative application of intelligent boom technologies based on disruptive concepts of crane maneuverability delivers a comfortable experience of intelligent operation;
6. The World-leading intelligently-controlled crane traveling system and the optimal integrated control technique reduce the excessive wearing in the braking system during a long downhill journey, and thus extend its service life;
7. The industry-leading HMI system of sedan-class technical sophistication makes operation easier and quicker;
8. The new-type styling and user-friendly design make driving and operation more convenient.
More Intelligent
More Cost Efficient
More User-friendly
Industry-Leading in Performance
|
Items |
Parameters |
|
Parameter items |
XCA220 |
|
Dimensions |
|
|
Full length of complete machine |
15500(mm) |
|
Full width of complete machine |
2980(mm) |
|
Overall height of complete machine |
3930(mm) |
|
Axle base |
2650+1650+2500+1650(mm) |
|
Wheel track |
2590(mm) |
|
Weight |
|
|
Total mass before driving |
55000(kg) |
|
Axle load |
12000×3+9500×2(kg) |
|
Power |
|
|
Engine model (upper) |
OM460LA.E3B/3 |
|
Rated power of engine |
361.1/1800(kw/(r/min)) |
|
Rated torque of engine |
2200/1300(N.m/(r/min)) |
|
Engine model (lower) |
— |
|
Rated power of engine |
— |
|
Rated torque of engine |
— |
|
Driving parameters |
|
|
Running |
|
|
Maximum running speed |
84(km/h) |
|
Minimum stable running speed |
1~1.5(km/h) |
|
Turning |
|
|
Minimum turning diameter |
18.5(m) |
|
Minimum turning diameter of jib nose |
22.5(m) |
|
Maximum gradeability |
67(％) |
|
Minimum ground clearance |
280(mm) |
|
Approach angle |
18(°) |
|
Departure angle |
14(°) |
|
Braking length (dry and flat asphalt or concrete road surface, speed: 30km/h ) |
≤9(m) |
|
Fuel Consumption per 100-kilometer |
65(L) |
|
Major performance parameters |
|
|
Maximum gradeability |
67(％) |
|
Maximum total lifting weight |
220(t) |
|
Minimum rated radius |
3(m) |
|
Maximum lifting moment of basic jib |
7393(kN·m) |
|
Turning radius of rotary table tail |
5030(mm) |
|
Landing legs |
|
|
Longitudinal |
8.89(m) |
|
Transverse (half stretching) |
8.3(m) |
|
Maximum lifting height |
|
|
Basic jib |
13.4(m) |
|
Maximum main jib |
73.5(m) |
|
Maximum main jib + fly jib |
108(m) |
|
Length of cargo boom |
|
|
Basic jib |
13.4 |
|
Maximum main jib |
73(m) |
|
Maximum main jib + fly jib |
108.2(m) |
|
Maximum fly jib |
— |
|
Operating speed |
|
|
Maximum rotating speed |
1.9(m) |
|
Lifting speed |
|
|
Main lifting mechanisms |
130(r/min) |
|
Auxiliary lifting mechanisms |
130 |
|
Fly jib winch |
— |
|
Extending and drawing back time of cargo boom |
|
|
Full extension |
600(s) |
|
Full drawing back |
600 |
|
Luffing time |
|
|
Arm raising |
55(s) |
|
Arm dropping |
— |
|
Deploying and retracting of landing legs-- horizontal |
|
|
Simultaneous deploying |
— |
|
Simultaneous retracting |
— |
|
Deploying and retracting of landing legs-- vertical |
|
|
Simultaneous deploying |
100(s) |
|
Simultaneous retracting |
70(s) |
Hydraulic Truck Crane 100 Ton Mobile Crane For Sale XCA100
Heavy Mobile Cranes 220 Ton Crane XCMG Truck Crane QAY220
XCMG Truck Crane 240 Ton All Terrain Crane For Sale QAY240
All Terrain Crane 200 Ton Mobile Crane For Sale QAY200
Hydraulic Truck Crane 180t All Terrain Mobile Crane QAY180
Mobile Truck Crane 260 Ton All Terrain Crane QAY260
XCMG Truck Crane 300 Ton Mobile Crane For Sale QAY300
220 Ton All Terrain Truck Crane Construction Equipment XCA220
All Terrain Truck Crane 350 Ton Heavy Mobile Cranes XCA350
All Terrain Truck Crane 160t All Wheel Drive Mobile Crane QAY160
Mobile Truck Crane 130 Ton All Terrain Crane XCA130L7_1
*Required
Products
220 Ton All Terrain Truck Crane Construction Equipment XCA220Copyright © Shanghai Super-above Industry Holdings Co.,Ltd Designed by Site.nuo.cn
