Wheel Loader

1.8 Ton Wheel Loader Mini Payloader Front End Loader LW180K

Type: Wheel loader

Model NO.: LW180K(CE)

Operating Load: 1800kg

Port: Shanghai

Payment Terms: L/C,T/T

Specification: CE

Production Capacity: 10000PC/Year

Contact Now

1.8 Ton Wheel Loader Mini Payloader Front End Loader LW180K PRODUCT DETAILS

1.8 Ton Wheel Loader Mini Payloader Front End Loader LW180K

Brief Introduction

With reasonable design, the machine adopts hydraulic mechanical drive, and four-wheel drive, featuring larger drive force and digging force; with small turning radius and convenient and agile operation, it is suitable for narrow working area. Z type bucket linkage, single arm, lifting cylinder of high pivot, strong digging force and short working cycle time, and higher working efficiency. Priority of on-demand oil supply for all hydraulic load-sensing steering and priority of single pump valve working hydraulic system, economic in energy-saving. With openable rear hood side door and full visibility, the cab provides the comfortable working environment and advantaged maintenance condition.

Feature

1. The streamline exterior, large-view glasses, and arc ballast feature beautiful modeling and are in line with international mainstream level.

2. The extended wheelbase (2,300mm) design applied adapts to diversified super-heavy working conditions, with the stability leading the industry.

3. The engineering version leading Yuchai engine for small-sized loaders features China-II emission compliance.

4. The special high capacity torque converter ensures the maximum utilization of engine power.

5. The super-large luxury cab (1,550mm in longitudinal length) features large space and good visibility.

Tech. Data

Overall Dimensions
Overall length (bucket on the ground)		5980 mm
Bucket width		2060 mm
Overall height		3200 mm
Wheel base		2300 mm
Tread		1550 mm
Min. ground clearance		298 mm

Specification
Rated operating load		1800 kg
Bucket volume		0.9～1.1 m3
Operating weight		6.2 t
Traveling speeds
Ⅰ		9 km/h
Ⅱ		26 km/h
Reverse Ⅰ		9 km/h
Reverse Ⅱ
Max. tractive force		45 KN
Max. climbing gradient		28 º
Max. dumping angle		45 º
Max. dumping height		2680 mm
Dumping reach		900 mm
Overturn angle of bucket
The lowest position		45 º
The highest position		48.5º
Bucket automatic leveling function		yes
Max. Breakout force		55 KN
Total cycling time		≦8.5S
Min. Turning radius		5180mm
Center of tyre		4470mm
Turning angle of the frames		35±1 º
Oscillating angle of the rear axle		±10 º

Engine	Rated Power Rated Speed Maximum Torque
YC4D80-T3A1	58 2300 305/1400~1600

Transmission system
Torque converter
Model	YJ280-4D
Type	1 stage, 3-elements
Cyclic diameter	280 mm
Conversion coefficient	K=3.19
Cooling method	Oil cooling-pressure circulating type
Oil inlet pressure	0.6～0.65Mpa
Oil outlet pressure	1.3～1.5Mpa

Transmission
Model	2B280
Type	Electro-hydraulic shift fixed axis type
Gear number	2 forward and 2 reverse
Ⅰ	2.091		2.186
Ⅱ	0.686		0.7177
Transmission working oil pressure	1.2-1.4MPa
Displacement of transmission oil pump	20 ml/r

Front and rear axle
Speed ratio	6.667
Hub reducer
Type	One stage-planetary deceleration
Speed ratio	3.478

Tyres
Tyre specification	16/70-20
Inflating pressure	Fore tyre: 0.30～0.32 MPa
	Rear tyre: 0.28～0.30 MPa
Braking system
Foot brake	Oil disc braking on 4 wheels
Braking air pressure	784-833 KPa
Hand brake	Clamp disc brake

Steering system
System pressure	14 MPa
Max turning angle	±35º

Hydraulic system of the working device
System pressure	16 MPa

Oil liquid volume
Fuel (diesel)	120 L
Lubricating oil of engine	11 L
T/M & T/C oil	22 L
Hydraulic reservoir	110 L
Axle	10 L

Note: Wheel loaders with different loading capacity according to your work condition are available.

Product Center

1.8 Ton Wheel Loader Mini Payloader Front End Loader LW180K

1.8 Ton Wheel Loader Mini Payloader Front End Loader LW180K PRODUCT DETAILS

1.8 Ton Wheel Loader Mini Payloader Front End Loader LW180K RELEATED PRODUCTS