Introduction 1. Concrete mixer truck opting left hand drive or right hand driven.
2. Optional for chassis: 4x2, 4x4,6x4, 6x6, 8x4, 8x8 models.
3. 3m3, 5m3, 6m3, 8m3, 9m3, 10m3, 12 m3 14m3 etc, many capacity are available to choose.
4. Provide different brand chassis: DONGFENG, SINTRUK, SHACMAN, NORTH BENS, FOTON,
ROWOR, HINO, HUUNDAI, JMC. Feature 1. The tank body uses double helical blades that makes its density moderate, with symmetrical mixing board on the front taper place; double blades and guiding blades of discharge are installed on the outlet of tank, which makes the discharge more evenly, faster in speed, and convenient for the pumping transportation of other devices (such as automobile pump). 2. Low angle for mixing drum can extend the service life of hydraulic pump, motor and reducer. The sub frame uses high intensity square tube with damping in the central area that can play role when vehicle is at full load and under the bad conditions of road, which can lower the center of gravity of truck and make it move more smoothly. 3. The upload production of this mixer adopts multiple advanced technology, which can produce various types of mixer in volume such as 3m3, 5m3,6m3,8m3, 9m3,10m3, 12 m3,18 m3 etc.
Specification
Truck Model
SACMT24
Dimension(Lx W xH)(unloaded)(mm)
8560X2496X3048
Approaching angle/Departure angle(°)
16/24
Overhang(front/rear) (mm)
1550/1860
wheelbase(mm)
3825+1350
Max speed(km/h)
90
Curb weight(kg)
10580
total Weight(kg)
25000
Engine
(Steyr technology, made in China)
Model
WD615.69water-cooled,four strokes,6 cylinders in line with water cooling,directly injection
Fuel type
Diesel
Horse Power, max(kw/rpm)
336HP
Emission
EURO4
Fuel tanker capacity(L)
400L
Transmission
Model
HW19710,10 Forward gears,2 Reverse
Brake system
Service brake
Dual circuit compressed air brake
Parking brake
spring energy, compressed air operating on rear wheels